5 Basic safety tips for DIY electricians at homes

Every home seeks electric service to some level or the other. And anytime sooner or later something or the other in your home electrical system is going to breakdown to put you into inconvenience. You need qualified electrical tradesmen to resolve the problem as soon as possible. Electricians, on the other hand, expect you to be aware about certain key facts related to their trade. Want to know what those facts are? Keep reading till the very end.

Never ignore the warning signs

You should never ever take any warning sign that indicates a problem in your home electrical system lightly and ignore it the first time it comes to your attention. These warning signs can vary ranging from a light switch that becomes excessively hot, popping noise from an outlet or a circuit breaker that refuses to reset. Thankfully most such issues are easy to resolve provided action is taken promptly without allowing the crisis to deepen with time, assures one of the best electricians in Westminster.

Know what is GFCI

Electricians often come across service calls for a failure in the circuit of a bathroom. As per norms any and every electrical outlet placed within 6 feet of any water source must be protected by a ground fault circuit interrupt or GFCI. GFCIs are a vital safety device; it cuts off power supply on detecting a drop in amperage. This is why these devices are usually found in bathrooms and exterior outlets than at other places of any building. A single GFCI covers or protects all the lights and outlets on that particular circuit. In other words, a GFCI triggers to kill the power supply to all the lights and outlets that apparently seem unrelated to each other. Moreover GFCIs are installed inside the circuit breaker box, which makes the overall picture more confusing for common folks.     

Power lines overhead are live

Overhead power lines are usually not insulated. Birds and squirrels sitting or moving along them stay alive because they are not touching the ground at the same time to complete the circuit. Neither are they offering electric current any other path than the cable itself. Outdoor power lines overhead mostly get weather coating and are deprived of insulation. Actually there is no need to insulate them since they are so high above the ground. All overhead electric wires are potentially fatal as they are live. You should better not approach them and even if you have to, be very cautious.  

Knowing your DIY limits is important

DIY is the call of the day and the DIY mindset is indeed appreciative. It is a great way to learn and master newer skills and boost self confidence. But as far al electrical DIY is concerned you should remember it has its limits. As a newbie on the DIY track you should limit yourself to electrical components outside of the wall. Gradually as your skill sets improve you lay your hands on more advanced tasks, provided the local authorities allow it. The problem arises with people who have more DIY enthusiasm than experience in tackling electrical jobs. If you are not aware about your electrical DIY limits things may turn fatal any time.

Black is Not always live as white is NOT always neutral

The colour codes of electrical wiring are likely to differ. This happens because of many reasons including a building’s electrical system is huge and complicated. Moreover it has been worked upon by a large number of people at different times and many of them lacked proper training or simply did not bother to follow the standard colour code. Thus when you open up an outlet you find a bird’s nest of cables, tapes, nuts and wires that make you go haywire. You must be extra cautious working DIY in this environment. Remember here you have no space to assume things your way. Use a non contact voltage tester to make sure a line is not live before starting work on it. 

Low voltage never means no danger

If the truth is to be spoken a low voltage system is not exactly as hazardous as working on an electrical breaker box. But still you must take some precautions whenever you go DIY on any low voltage electrical system. In fact here you an excellent learning curve. Consider low voltage wiring as standard. That way you pick up the best practices and be safe while working on higher voltage systems. You should remember that it is not the voltage that proves fatal, rather the current. A low voltage wiring can draw higher volume of current that can put your life in risk.

A top electrician in Westminster shares the words of wisdom mentioned above to ensure you are safe while working on your home’s electrical system DIY. For more information or guidance please feel free to contact us.